Self Leveling 5 Beam Line Laser Level Review

These battery-powered devices shoot precise beams of light that stay level and plumb over long distances—perfect for installing cabinets, doors, tile, trim, and more. Hither are our picks for the iv basic types of self-leveling lasers, with pointers on how to use each one.

Laser Level Reviews

1. 3-Plane Laser Level: Bosch GLL3-80

A laser level is projecting two laser lines perpendicular to each other on the floor.

Meet the only light amplification by stimulated emission of radiation level that simultaneously projects three 360-caste perpendicular beams on the walls, ceiling, and floor. It too shoots single horizontal or vertical lines. It has no moving parts, so batteries and parts concluding longer.

Specs: i.7 pounds, 65-foot visibility, ¼-inch accuracy at 100 anxiety. Includes mountain with rack-and-pinion height adjustment.

About $600; boschtools.com

2. Dot Laser Level: Johnson 40-6670

A plumb laser level with the beam pointing downwards and another pointing upwards on the front of the device.

This device shoots two plumb beams—one up, one down—which is all you need to install doors or mark ceiling-fixture locations. We liked its bright dots and the housing's easy-to-grip, protective safe-like covering.

Specs: one.27 pounds, 100-foot visibility, accurate to ¼ inch at 100 anxiety. Includes target plate to enhance axle visibility.

About $xc; johnsonlevel.com

three. Cross Laser Level: Craftsman 48250

A laser level that works well for tile and floor because the light comes from the side of the device at a 120 degree angle.

It projects 120-degree level and plumb beams separately or together. Handy for tiling walls or floors. Like these other lasers, information technology beeps when out of level, but this one's beam can exist locked, for example, to help you lay out staircase wainscoting.

Specs: one.five pounds, 100-foot visibility, accurate to ¾ inch at 100 feet. Includes adjustable base of operations.

Nearly $90; craftsman.com

four. Rotary Laser Level: DeWalt DW074KD

The spinning beam creates a 360-degree level line. Apply it for projects on multiple walls, such as kitchen cabinets and chair rail. Outdoors, a receiver detects the invisible beam up to 600 feet away.

Specs: four.5 pounds, 100-foot visibility, accurate to ¼ inch at 100 anxiety. Includes receiver, wall mount, and target plate.

About $465; dewalt.com

v. Modernistic Spirit Levels

Barbarous Lighted Torpedo Level TLL049M

A modern spirit laser lever from home depot.

Milled from a hunk of aircraft-course aluminum, this 9-inch-long level is tough and handy. Strong rare-earth magnets permit it cling to fe drain pipes and steel studs, and illuminated vials prove helpful in dark spaces.

Most $30; for plumbing, steel framing, and tight spots. Abode depot.

Empire True Blueish E80.24 I-beam

A modern spirit laser level from Empire Level.

This rugged 24-inch level is a versatile, lightweight workhorse for plumbing and leveling everything from cabinets to fence posts. It features a graduated vial that reads pitch in ⅛-inch increments, useful for checking the slope of a gutter or a walkway.

About $25; for carpentry, plumbing, and landscaping. empirelevel.com

Stabila 41048 R-Beam

A yellow modern spirit laser level from Stabila.

The R-shaped cross department is easy to grab and, according to the manufacturer, 120 pct stronger than its peak-of-the-line box-beam levels. Use this 48-inch model to hang doors, as a straightedge—it has 3 uninterrupted edges for hitting lines—or even as a screed. It's a snap to clean.

About $180; for carpentry, landscaping. stabila.com

Level Techniques

1. Tile a ceiling (with Can)

Person projecting a laser level onto the ceiling to help align a section of ceiling tile.

Ceiling panels wait best with i row centered above a chief doorway. Mark the ceiling 12 inches to i side of the doorway's middle, where the panel edges will land. Transfer the marker to the opposite side of the room. Using a three-airplane laser, marshal one beam with both marks and the crossbeam where you desire the primal panel'south perpendicular edge to land. Nail the first rows of panels forth the laser lines.

2. Plumb a Jamb

Person using a laser level to measure where the hinge of a door should go by seeing where the laser lands on the measuring tape.

Prepare the dot laser several inches from the jamb, with the dot centered between the edges of the head jamb. Hold a measuring tape horizontally against the centerline of the side jamb at each swivel location, and check where the beam lands on the tape. Shim between the jamb and stud at those locations until all the jamb-to-axle measurements friction match.

3. Tile a Wall

Person using a laser level to mark off where a section of tile will be installed on the wall.

Measure out and marker the heart point of the area to be tiled. Set the cross laser far enough from the wall then that the beams span the surface area and cross at the marked centre point. Working in 1 quadrant at a time, spread the agglutinative, and so start setting tiles aslope the vertical beam. Tile up to the horizontal beam. Finish ane quadrant before starting the next.

four. Install Wainscot

Person installing wainscot on a wall and using a laser level to help mark the height.

Mark a wall where you lot want the top edge of the dewdrop board to state. Gear up the rotary laser in the middle of the room on a tripod, turn on the laser, and adjust the speed of the beam'due south rotation until a solid line appears effectually the room. Conform the tripod superlative until the laser line meets the mark on the wall.

sandersgrater80.blogspot.com

Source: https://www.thisoldhouse.com/tools/21018611/toh-tested-laser-levels